Garmin Avionics Audio Panels GMA 245 Unit Only 010-01318-00
Garmin Avionics Audio Panels GMA 245 Unit Only 010-01318-00
Regular price
£1,445.00 GBP
Regular price
Sale price
£1,445.00 GBP
Unit price
per
Physical & Performance
Unit size: 6.3"W x 1.33"H x 8.09"D (160 x 34 x 205 mm) includes mounting rack and connectors
Weight: 1.78 lbs (807.4 g) includes rack, backplate and connectors
Electrical: 14-28 VDC
Environmental
Temperature: -20° C to +55° C (operating)
Altitude range: to +55,000 ft MSL unpressurized
Power requirements: 11 to 33 VDC input
Audio Inputs
Impedance: 600 ohm
Max. input: 5 Vrms
Isolation: 60 dB minimum
Bandwidth: 100 Hz to 6.5 kHz
Transceiver: 3 (including TEL)
Receiver: 5 (NAV1, NAV2, AUX1, AUX2, AUX3)
Alerts: 4 (unswitched)
Telephone input: 1
Intercom Functions
Positions: 6 (pilot,copilot, 4 passengers)
Volume control: 2 (pilot, copilot/passengers)
VOX: Automatic (1 per MIC input)
Modes: Pilot, crew, all
MIC impedance: 150 ohm
MIC Bias: 11 VDC through 470 ohm
Keyed ICS: Configurable
Music functions
Inputs: 2 (independent from Bluetooth audio)
Impedance: 600 ohm (differential)
Max. input: 3.0 Vrms
Gain: +24 dB Max/-96dB min
Input level: < 200 mVrms at max gain for full power out 3dB@1kHz Bandwidth 20 Hz to 20 kHz
Distortion: < 0.1% THD+N typical at full power over full bandwidth
Muting: Selectable and configurable
Volume control: Knob controlled (pilot and copilot/passenger)
Bluetooth
Supported profiles: A2DP and AVRCP (music) and HFP (phone)
Paired devices stored: 10
Connections allowed: 1 device
Supported devices: Phones, tablets, VIRB XE, G3X additional features
Volume: Set by device, and adjustable on GMA display 3dB@1kHz Bandwidth 20 Hz to 20 kHz
Distortion: < 0.1% THD+N typical at full power over full bandwidth
Firmware updates: Free and field loadable by SD card
Headphone Outputs
Output amplifiers: 3 Stereo (pilot, copilot, passenger)
Output power: 65 mW into 150 Ohms Pilot and Copilot, 260 mW into 37.5 Ohms passenger
Distortion: < 3% THD+N at 10% Power, < 10% THD+N at full power
Frequency response: 20 Hz to 20 kHz
Impedance rated: 150 Ohm pilot/copilot, 37.5 Ohm Passenger (4-150 Ohm headsets)
Impedance supported: 150 to > 600 Ohm
USB Charge Port
Rated power: 10 Watt
Max charge current: 2.1 Amps
Overcurrent protection: USB charge port protection with current > 2.3 Amps
Device supported: Any USB device
Charging scheme: DCP
Speaker
Outputs: 1
28 Volt Aircraft : 10 Watt into 4 Ohm; 7 Watt into 8 Ohm
14 Volt Aircraft: 3 Watt into 4 Ohm 3dB@1kHz Bandwidth 350 Hz to 6.5 kHz
Distortion: < 10% THD+N at full power, < 3% THD+N at 10% power
Voice Recorder
Record time max: 1 minute
Code Load Options
SD card or by G3X when in the G3X system
DIP Switch
Config switches: 8 (See install manual for descriptions)
Lighting Bus
Voltage: 14 V or 28 V
Unit size: 6.3"W x 1.33"H x 8.09"D (160 x 34 x 205 mm) includes mounting rack and connectors
Weight: 1.78 lbs (807.4 g) includes rack, backplate and connectors
Electrical: 14-28 VDC
Environmental
Temperature: -20° C to +55° C (operating)
Altitude range: to +55,000 ft MSL unpressurized
Power requirements: 11 to 33 VDC input
Audio Inputs
Impedance: 600 ohm
Max. input: 5 Vrms
Isolation: 60 dB minimum
Bandwidth: 100 Hz to 6.5 kHz
Transceiver: 3 (including TEL)
Receiver: 5 (NAV1, NAV2, AUX1, AUX2, AUX3)
Alerts: 4 (unswitched)
Telephone input: 1
Intercom Functions
Positions: 6 (pilot,copilot, 4 passengers)
Volume control: 2 (pilot, copilot/passengers)
VOX: Automatic (1 per MIC input)
Modes: Pilot, crew, all
MIC impedance: 150 ohm
MIC Bias: 11 VDC through 470 ohm
Keyed ICS: Configurable
Music functions
Inputs: 2 (independent from Bluetooth audio)
Impedance: 600 ohm (differential)
Max. input: 3.0 Vrms
Gain: +24 dB Max/-96dB min
Input level: < 200 mVrms at max gain for full power out 3dB@1kHz Bandwidth 20 Hz to 20 kHz
Distortion: < 0.1% THD+N typical at full power over full bandwidth
Muting: Selectable and configurable
Volume control: Knob controlled (pilot and copilot/passenger)
Bluetooth
Supported profiles: A2DP and AVRCP (music) and HFP (phone)
Paired devices stored: 10
Connections allowed: 1 device
Supported devices: Phones, tablets, VIRB XE, G3X additional features
Volume: Set by device, and adjustable on GMA display 3dB@1kHz Bandwidth 20 Hz to 20 kHz
Distortion: < 0.1% THD+N typical at full power over full bandwidth
Firmware updates: Free and field loadable by SD card
Headphone Outputs
Output amplifiers: 3 Stereo (pilot, copilot, passenger)
Output power: 65 mW into 150 Ohms Pilot and Copilot, 260 mW into 37.5 Ohms passenger
Distortion: < 3% THD+N at 10% Power, < 10% THD+N at full power
Frequency response: 20 Hz to 20 kHz
Impedance rated: 150 Ohm pilot/copilot, 37.5 Ohm Passenger (4-150 Ohm headsets)
Impedance supported: 150 to > 600 Ohm
USB Charge Port
Rated power: 10 Watt
Max charge current: 2.1 Amps
Overcurrent protection: USB charge port protection with current > 2.3 Amps
Device supported: Any USB device
Charging scheme: DCP
Speaker
Outputs: 1
28 Volt Aircraft : 10 Watt into 4 Ohm; 7 Watt into 8 Ohm
14 Volt Aircraft: 3 Watt into 4 Ohm 3dB@1kHz Bandwidth 350 Hz to 6.5 kHz
Distortion: < 10% THD+N at full power, < 3% THD+N at 10% power
Voice Recorder
Record time max: 1 minute
Code Load Options
SD card or by G3X when in the G3X system
DIP Switch
Config switches: 8 (See install manual for descriptions)
Lighting Bus
Voltage: 14 V or 28 V